Publicatie Laka-bibliotheek:
Cleaning of JET Vacuum Vessel using the Carbon Dioxide Pellet Blasting Technique (1995)
| Auteur | JET, S.M.Scott |
| Datum | maart 1995 |
| Classificatie | 6.07.2.22/06 (KERNFUSIE - JET/NET) |
| Voorkant | ![]() |
Uit de publicatie:
1.0 INTRODUCTION Until the construction of the Mkl Divertor it had been usual practice to perform a high pressure water wash of the inside of the JET vacuum vessel. This had been carried out at the end of any shutdown which involved a considerable amount of work. The purpose of these washes were to remove contamination generated during the work itself and so reduce any adverse effects on plasma performance. These washes were not designed to remove beryllium or reduce in any way the respiratory protection requirements during work in the vessel. A high pressure water jetting system was used, usually with a 1 - 2% aqueous solution of Nutracon at pressures of up to 100 bar and flow rates of 10 m3 /h. The construction of the pumped divertor has now made the use of water as a washing medium unsuitable. Prior to the installation of the Mkl divertor alternative cleaning methods were examined and one which showed potential was Carbon Dioxide pellet blasting. After a number of trials were performed it was decided that the vessel should be cleaned using this method after completion of the divertor coil build. How it was carried out, what results were obtained and its potential future use are discussed in this report.
Deze publicatie is alleen op papier bij Laka beschikbaar, niet als pdf.
Publicaties zijn te leen of informeer of we een kopie kunnen maken. Soms, als we tijd hebben, lukt dat tegen kostprijs van de kopieën.

