Laka Foundation

Publication Laka-library:
Full-scale tests of sulfur polymer cement and non-radioactive waste in heated and unheated prototypical containers (1992)

AuthorIdaho Nat. Engineering Lab INEL
DateFebruary 1992
Classification6.01.5.50/32 (WASTE - RADIOACTIVE WASTE GENERAL)
Front

From the publication:

ABSTRACT

Sulfur polymer cement has been demonstrated to be superior to Portland cement
in the stabilization of numerous troublesome low-level radioactive wastes, notably
mixed waste fly ash, which contains heavy metals. EG&G Idaho, Inc. conducted
full-scale, waste-stabilization tests with a mixture of sulfur polymer cement and
nonradioactive incinerator ash poured over simulated steel and ash wastes. The
container used to contain the simulated waste for the pour was a thin-walled,
rectangular, steel container with no appendages. The variable in the tests was that
one container and its contents were at 65•f (18•c) at the beginning of the pour,
whilethe other was preheated to 275•f (135•c) and was insulated before the pour.
The primary goal was to determine the procedures and equipment deemed operationally
acceptable and capable of providing the best probability of passing the only remaining
governmental test for sulfur polymer cement, the Nuclear Regulatory Commission's
full-scale test. The secondary goal was to analyze the ability of the molten cement
and ash mixture to fill different size pipes and thus eliminate voids in the resultant
24 ft3 monolith.

This publication is only available at Laka on paper, not as pdf.
You can borrow the publication or request a copy. When we're available, this is possible for a small fee.