Publication Laka-library:
Nucleon (1994)
| Author | Nuclear Research Inst.REZ |
| Date | 1994 |
| Classification | 2.39.0.00/01 (CZECH REPUBLIC - GENERAL) |
| Front | ![]() |
From the publication:
COMPARISON OF RESULTS OF MCNP 4.2 MONTE CARLO CODE WITH EXPERIMENTAL DATA OR COMPUTATIONAL RESULTS OF SOME DETERMINISTIC APPROXIMATE CODES 1. INTRODUCTION An important way how to meet the contemporary demands of nuclear facilities operating organizations on safety and economic efficiency is the development and utilization of methods and codes based on the non-approximate form of the Boltzmann transport equation. The Monte Carlo codes belong to the category of such tools for the solving of transport problems. They make possible a detailed specification of the required neutron features of examined areas of the nuclear assemblies in a more detailed and more optimum way than it is possible with other numerical methods. The Monte Carlo code enables to form exact foundations for the planning of nuclear reactor operation and for the development of effective codes based on the approximate form of the transport equation. Moreover. MC codes can serve for testing the accuracy of some other numerical methods. One of the best MC codes, the well-known Los Alamos MC code MCNP 4.2 [I], has been exploited by the author since 1991, when it was obtained from RSIC in Oak Ridge. This code is often referred as " the most rigorous analytical tool". A large number of nuclear reactor physics tasks ([3-6]. etc.) were run during this time period and many interesting and surprising results were acquired. A small part of them is presented in this paper to show a portion of a very wide problem spectrum which can be treated by MCNP 4.2 code. The main reason for doing it is to point out the importance of conservative application of the deterministic approximate reactor codes. Before presenting selected solved problems, it may be suitable to quote words of a Monte Carlo authority. Dr. E. M. Gelbard from Argonne National Laboratory, presented in a panel discussion [2]: "But for one thing Monte Carlo could be used to benchmark the whole computational method. That is, we do slowing down calculations. We get group constants. We compute fluxes in cells. We group average, and in the group averaging we have to compute resonance escape probabilities and Dancoff factors, and when we are finished we end up with a very complicated problem. Let us say we have a lattice that is facing a water channel, and we have to make assumption about Dancoff factors. Every stage of that calculation could be benchmarked by Monte Carlo techniques."
This publication is only available at Laka on paper, not as pdf.
You can borrow the publication or request a copy. When we're available, this is possible for a small fee.

